|
574-256-5001 or 1-800-832-5653
Control Products for Shot Peening and Blast Cleaning Processes |
||||
| Home | | About Us | | Contact Us | | Distributors | |
Certified Almen Mini-Strips
Mini-Strip Shot Peening Intensity Verification Procedure "Mini-Strips Will Solve Problem" |
The EI Almen mini-strip will verify shot peening intensity in areas that are too small and/or inaccessible with a standard-size Almen strip and holder. This approach replaces the laborious shaded-strip procedure with a faster and more accurate process. Shot peening technicians in aerospace and spring and gear manufacturers will appreciate the ease and convenience of the new process.
The mini-strips measure 1'' x 1/8'' (25.4 mm x 3.175 mm) and can be attached with double-sided tape directly to a test component or simulated fixture—no need to allow room for a standard Almen holder. Plus, they're ready-to-go—no need to make a shaded strip. Their small size makes them ideal for measuring intensity in small or hard-to-reach areas like dove-tail slots in jet engine disks, gear roots, and the internal bore of springs, without creating a complicated test fixture.
The Almen mini-strips must be used with the TSP-M gage.
| | ||||||
|---|---|---|---|---|---|---|
| Type-Grade | Thickness (in./mm) | Flatness/PreBow (in./mm) | Hardness | ListPrice/ Strip | Quantity/ Box | List Price/ Box |
| A-M1 | 0.0520 | 1.32 0.0500 | 1.27 | ±0.001/±0.025 | HRc 44-50 | $1.25 | 20 | $25.00 |
| N-M1 | 0.0320 | 0.81 0.0300 | 0.76 | ±0.001/±0.025 | HRc 44-50 | $1.49 | 20 | $29.80 |
A, and N strips are 1'' length x .125'' width (25.4 mm x 3.175 mm)
Grade 1 is a service mark owned by Electronics Inc.
Phone: 574-256-5001 / 800-832-5653 - Fax: 574-256-5222