|
574-256-5001 or 1-800-832-5653
Control Products for Shot Peening and Blast Cleaning Processes |
||||
| Home | | About Us | | Contact Us | | Distributors | |
FC-24 Controller
Media Flow Controller
The FC-24 Controller (left) and MagnaValve (right) work together to provide accurate and repeatable ferrous media media flow rates.
Features
Description
Specifications
Data Sheet
• 24 Vdc
• Monitors flow rate in lb/min and kg/min
• Digital display
• High-low alarm contacts
• Accepts remote command setpoint
• Provides analog recorder output
• Easy panel mounting
The FC-24 Controller provides a closed-loop system for the MagnaValve™. The MagnaValve and controller provide accurate regulation of steel shot in shot peening and blast cleaning applications where accurate and repeatable flow rates are desired.
Clear and comprehensive installation manuals simplify installation for the FC-24 Controller. In addition, the product is supported by the Electronics Inc. application engineering staff.
| Power | 24 Vdc @ 0.5 A |
| Flow Sensor Input | 0 - 10 Vdc into 100 K |
| Servo Output Signal | 0 - 10 Vdc |
| Flow Enable Output | 24 Vdc @ 10 mA |
| Weight | 1.3 lb /.59 kg |
| Display Range | 0 - 1999 |
| Decimal Points | 1000, 100.0, 10.0 |
| Alarm Band | 0 - 50% of full scale |
| Alarm Range | 0 - 10 seconds |
| Enable Delay | 0 - 10 seconds |
| Temperature Range | 32 - 122 ° F (0 - 50 ° C) |
Phone: 574-256-5001 / 800-832-5653 - Fax: 574-256-5222