|
574-256-5001 or 1-800-832-5653
Control Products for Shot Peening and Blast Cleaning Processes |
||||
| Home | | About Us | | Contact Us | | Distributors | |
FC Controller
Media Flow Control
The FC Controller (right) and 120 Vac MagnaValve (left) work together to provide accurate and repeatable ferrous media flow rates.
Features
• 120 Vac
• Monitors flow rate in lb/min and kg/min
• Digital display
• High-low alarm contacts
• Accepts remote command setpoint
• Provides analog recorder output
• Easy panel mounting
Description
The FC Controller provides a closed-loop system for the MagnaValve™. The MagnaValve and controller provide accurate regulation of steel shot in shot peening and blast cleaning applications where accurate and repeatable flow rates are desired.
Clear and comprehensive installation manuals simplify installation for the FC Controller. In addition, the product is supported by the Electronics Inc. application engineering staff.
Specifications
0 - 5 Vdc 0 - 1999*
Power 115 Vac, 50/60 Hertz 50 VA
Inputs Flow Sensor Input Outputs
Valve Output 50 Vdc PVM @ 8-25 Hertz Excitation Voltage ±12 Vdc @ 100 mA Reference Voltage 10 Vdc @ 10 mA Weight 5 lbs Display Range Decimal Points 1000, 100.0, 10.0 Alarm Band 0 - 50% of full scale Alarm Delay 0 - 10 seconds Enable Delay 0 - 10 seconds Temperature Range 0 - 50 ° C (32 - 122 ° F)
* Expanded range available upon request
Phone: 574-256-5001 / 800-832-5653 - Fax: 574-256-5222