 |
May 26-27 Copenhagen, Denmark
Class Agenda
Registration and exhibit set-up from 14:00 to 17:00
| Monday | Tuesday | ||
|---|---|---|---|
| 1 | 8:00 | Theory Dr. John Cammett |
Applications Dr. John Cammett |
| 2 | 9:00 | Intensity Jack Champaigne |
Job Shop
Processing Yves Le Guernic |
| 10:00 | Break | Break | |
| 3 | 10:30 | Media Jack Champaigne |
Shot Peening of
Aluminium Alloys before Hard Anodizing Dr. Hans Peter Nielsen |
| 4 | 11:30 | Coverage and
Masking Jack Champaigne |
Sonnimax Erik Pandrup |
| 12:30 | Lunch Keynote address Dr. Volker Schulze |
Lunch | |
| 5 | 1:30 | Inspections
& Audits Review Jack Champaigne |
Dynamic Image
Particle Characterization......... Marquardt v. Hodenberg |
| 2:30 | Break | Break | |
| 6 | 3:00 | PeenStress
Software Yves Le Guernic |
Almen Saturation
Curve Practice Jack Champaigne |
| 7 | 4:00 | Surface
Characteristics and Fatigue Properties Dr. Volker Schulze |
*Optional Exam |
Back to Europe Workshop
Note: Selected exhibitors have also been asked to make presentation on Tuesday.
Note: Examination on Tuesday is optional fee of 50 euro. You must pass Level 1 exam prior to taking Level 2 exam. You must pass Level 2 exam prior to taking Level 3 exam.
Federal Aviation Administration FAA approval number AGL/0303/0038/8 credit is available for aviation mechanics for Inspection Authorization Renewal (must score 70% or greater on exam)
Note: Schedule subject to change.
Keep coming back to this page--we'll be adding more
information as it becomes available!
Last revised on May 19, 2003
 |
Contact information URL: http://www.electronics-inc.com Comments: shotpeener@shotpeener.com Revised: 5/03 |