|
574-256-5001 or 1-800-832-5653
Control Products for Shot Peening and Blast Cleaning Processes |
||||
| Home | | About Us | | Contact Us | | Distributors | |
US Agenda
|
US Shot Peening and Blast Cleaning Workshop
October 26-28, 2010
St. Louis, Missouri
The official agenda containing a schedule of classes, class descriptions and facility layout will be made available closer to the event date. Guaranteed class topics are listed below.
Class Topics - Agenda will provide schedule and descriptions
- Abrasive Media Selection
- Advanced Saturation Curve Generation Practical
- Air Peening Machine Design and Setup
- Air Peening Machine Preventive Maintenance and Problem Resolution
- Almen Gage Calibration
- Almen Gage R&R - Repeatability and Reproducibility
- Basic Saturation Curve Generation Practical
- Blast Cleaning Applications
- Cast Steel Shot
- Cut Wire Media
- Flapper Peening Practice / Practical
- Flapper Peening Theory and Applications
- Intelligent Nozzle Motion
- Intensity - Basic and Advanced
- Introduction to Blast Cleaning Principles and Techniques
- Introduction to Shot Peening
- MagnaValve Applications for Air Blast Machines
- MagnaValve Applications for Wheel Blast Machines
- Masking Techniques
- Media Properties and Specifications
- Media Size and Quality Inspection Practice
- Nadcap Audit Preparation
- Nozzle Design and Applications for Air-Operated Blast Equipment
- Peening Equipment Basics, Features and Advances
- Peening of Carburized Gears
- Peening Process Characterization and Optimization
- Peening Techniques for Challenging Applications
- Practical Approach to Blast Cleaning and Deburring Applications
- Practical Approach to Shot Peening Applications
- SAE Spec Forum - Past, Present and Future
- Selecting the Best Peening Parameters
- Shot Peening Coverage
- Shot Peening Media - Basics
- The Essentials of Blast Cleaning
- Ultrasonic Impact Technology
- Ultrasonic Peening on Jet Engine Parts
- Velocity Measurement / Intensity Verification
- Wet Slurry Blast Cleaning/Peening
- Wheel Blast Machine Maintenance and Problem Solving
- Wheel Machine Design and Setup
You can REVIEW LAST YEARS AGENDA as an example of what will be offered at this year's workshop
US Shot Peening and Blast Cleaning Workshop
October 26-28, 2010
St. Louis, Missouri
©2010 Electronics Incorporated - 56790 Magnetic Drive - Mishawaka, Indiana 46545
Phone: 574-256-5001 / 800-832-5653 - Fax: 574-256-5222
Phone: 574-256-5001 / 800-832-5653 - Fax: 574-256-5222