Electronics Incorporated: Earlier Products

Earlier Products

Most of these older products are still available, some from inventory, some on special order only. Click on the product model for more information. The linked page will describe the status and recommend a replacement product if the original product is no longer available. It will also have links to data sheets and installation guides.

Models with * are no longer available. Call for assistance.

MagnaValves - for wheel type abrasive blasting and peening machines

Model 25*, 50*,
Model WA* or Model WM*

MagnaValves - for air type peening machines

Model , 1477*
Model , 1478*
Model , 1479*
Model , 1577*
Model , 1578*
Model , 1579*

Controllers for MagnaValves

Model 101 * PowerPak
Model 362 Controller (all versions)
Model VD4A Power Pak
Model VD4AA Power Pak

Monitors for steel shot or grit

Model 360* (special) shot flow monitor

The 360 monitor was a special adaptation of the 362 controller (ignoring the MagnaValve output section) for an application that required an external "enable" signal to activate the alarms. This unit is no longer in production. It can be repaired at the factory. We recommend you use the MSD Monitor as a replacement since it has the "enable" signal for the alarms.

Note: We are constantly improving our MagnaValves and controls and as we update the products we increment the model number suffix. For example model 478C becomes 478D. It is not necessary to include the suffix in your order. We will be shipping the latest version available. All newer versions MagnaValves are backwards compatible with previous models. This means that the physical size and electrical requirements are completely interchangable.
Model AC and FC controls are an exception to the backwards compatibility. Version "A of the controls worked only on 110 Vac. Version "B" was capable of 90-240 Vac operation and this was backwards compatible with version "A". Due to problems with the internal power supply used in version "B" we conducted a product recall. We modified the internal power supply to remedy the high temperature limitations that we found. Modified "B" version controls become "B1" and can still work at 90-240 VAC. The modification is relilable but not cost effective. Model "B" version units returned for repair that must work with 230 Vac will be upgraded to the modification as version "B1". Otherwise we will convert the version "B" unit into version "C". New production units are built to version "C" where once again they only operate on 110 VAC. For application assistance please contact our engineering department.

For engineering assistance contact the factory 1-574-256-5001. Some of these products are still available from inventory or can be made to special order. Almost all of the older products can still be repaired.

Air Pollution Controls (1974-1990)
Model 254 Bag House Fan Damper Current Controls
Model 254 Bag House Temperature Contols
Model 202 Steel Mill Exhaust Damper Position Controls