24 Vdc Series MagnaValves
Magnetic Media Valve for Air Blast Machines

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The FC-24 Controller (left) and MagnaValve (right) work together to provide accurate and repeatable ferrous media flow rates for air blast machines.

Model / Flow Rate Range
Features
Description
Specifications
Data Sheet in PDF

Model       Flow Rate Range

576-24        .2 - 2 lb/min (.1 - 1 kg/min)

577-24        1 - 10 lb/min (.5 - 5 kg/min)

578-24        3 - 30 lb/min (1.5 - 15 kg/min)

579-24       10 - 100 lb/min (5 - 50 kg/min)

580-24       20 - 200 lb/min (10 - 100 kg/min)

590-24       30 - 300 lb/min (15 - 150 kg/min)

 

Top

 

Features

 • 24 Vdc

• ±5% full-scale accuracy (higher accuracy available upon request)

• Normally closed

• No moving parts

• Meets SAE AMS 2430 and 2432 specifications

 

Top

 

Description

 The MagnaValve™ is a normally closed magnetic valve that regulates the flow of steel shot and cut wire media in air blast machines. The MagnaValve’s built-in sensor measures flow rate and, together with the FC-24 Controller (sold separately), provides accurate and repeatable flow rates. The MagnaValve can be factory calibrated for various media types and sizes. 

 

The MagnaValve’s maintenance-free construction includes a strong and stable rare earth permanent magnet for normally closed operation and an electromagnet for controlling shot flow rates. When no power is applied to the MagnaValve, the permanent magnet stops all flow. If the power is interrupted for any reason, the permanent magnet in the valve securely holds the shot. With power applied, the magnetic field is neutralized and shot is allowed to flow through the valve. The valve is factory calibrated and results are supplied upon request.

 

The MagnaValve provides reliable, repetitive, and consistent media flow rates for shot peening and blast cleaning applications. The MagnaValve makes it easy to document flow rate and establish or repeat a good set-up. The valve meets the requirements of SAE AMS 2430, AMS 2432 and other aerospace and commercial specifications.

 

Clear and comprehensive installation manuals simplify installation for the 24 Vdc Series MagnaValves and the FC-24 Controller. In addition, the products are supported by the Electronics Inc. application engineering staff. 

 

Top

 

Specifications

 

Power                                             24 Vdc @ 2A (50 VA)

Media                                            All ferrous media except Cast Stainless Steel

Maximum Pressure                100 PSI

Mode                                              Normally Closed

Temperature Range               40 - 110º F (5 - 43º C)

Servo Command Input         0 - 10 Vdc

Flow Enable Input                  24 Vdc

Flow Sensor Output               0 - 10 Vdc

Display LEDs                              Valve On 

                                                           Command Input 

                                                           Flow Enable 

                                                           24V Power

 

Control - FC-24 Controller (sold separately) 

Flow Sensor Input                   0 - 10 Vdc into 100K 

Flow Enable Output              24 Vdc @ 10mA 

Servo Command Output     0 - 10 Vdc 

 

 

Model	Pipe Size	"A"	"B"
576-24	1" NPT	2.5" (63.5 mm)	6.0" (152.4 mm)
577-24	1" NPT	2.5" (63.5 mm)	6.0" (152.4 mm)
578-24	1.25" NPT	2.5" (63.5 mm)	6.0" (152.4 mm)
579-24	1.25" NPT	2.5" (63.5 mm)	8.0" (203.2 mm)
580-24	2" NPT	3.0" (76.2 mm)	8.0" (203.2 mm)
590-24	2" NPT	3.0" (76.2 mm)	8.0" (203.2 mm)

24 Vdc Series MagnaValves come with 6 ft. cable 

Top